(一)簡介或特點：

1.本機型採用大空間設計概念加高機台高度，齒輪箱週邊空間更加寬敝方便維修保養。

2.細碎後的原料經由輸送機輸送至研磨主機，經由定量輸送系統控制原料流量落入研磨主機中央底部，藉由磨盤轉動的離心力將原料向外推送至磨輪之間進行研磨，原料進入三顆磨輪研磨區後經過油壓系統控制研磨壓力進行輾壓研磨成細粉。

3.比表面積1250目的產品可由立式磨粉機設備直接產出。

4.齒輪箱採用球墨鑄鐵鑄造一體成型，使研磨受力平均分配相對增加機台的穩定度，同時也沒有鋼板焊接與受力不平均及機械應力的問題，大大提高齒輪箱的壽命。

5.大模數硬齒面的設計相對加大傳動軸心直徑及軸承型號使齒輪箱的安全系數提升到3.5倍。

(二)應用或適用範圍：

可廣泛應用於水泥、電力、冶金、化工、非金屬礦等行業，並專注於非金屬礦，煤粉和礦渣等三大領域，尤其是在方解石、石灰石、滑石等非金屬礦物立式磨粉機無疑是應用最為專業的磨粉設備。

(I)Introduction to the Product Features

1.The model uses a large space design concept to increase the height of the machine, and the surrounding space of the gearbox becomes wider for more convenience during the repair and maintenance process.

2.The finely ground raw materials are transported to the grinding machine via the conveyor, and the flow of raw materials is controlled by the metering system, which allows the raw materials to be poured into central bottom of the grinding machine. The raw materials are pushed out by the centrifugal force of the rotating disc to be ground between the grinding wheels. Then, the oil hydraulic system controls the grinding pressure and grinds the raw materials into fine powder in the three-wheel grinding zone.

3.The products with a specific surface area of 1250 m2/g can be directly produced by the vertical mill equipment.

4.The gearbox is made of ductile cast iron, which makes the grinding force evenly distributed to increase the stability of the machine relatively. At the same time, there is no problems of steel plate welding or uneven mechanical stress and mechanical stress, which greatly improves the life of the gearbox.

5.The safety factor of the large-modulus hard-tooth-surface design is increased by 3.5 times compared to that of the increased drive shaft diameter and the bearing-type gearbox.

(II)Scope of Application:

The vertical milling machine can be widely used in cement, electric power, metallurgy, chemical, non-metallic mineral and other industries, which are mainly focused on three areas of non-metallic mines, pulverized coal and slags. In particular, the vertical milling machine is undoubtedly the most professional equipment for milling of non-metallic minerals such as calcite, limestone, talc.

Product Prices:Quoted price and Inquiry

(一)簡介或特點：

選粉機是由馬達經由皮帶帶動皮帶輪轉動分級葉輪，並由變頻器控制馬達轉速來調整分級產品的細度。細的產品通過葉輪到達集塵機，粗的產品掉到二次風路再由二次風吹送，將細粉吹送到分級室，粗的部份則由旋轉閥排出。

(I)Introduction to the Product Features:

The rotating impeller belt of the powder concentrator is driven by the motor, and by the frequency converter is used to control the motor speed and adjust the grades of fineness in the products. The fine product reaches the dust collector through the impeller, while the coarse product falls to the secondary wind-blowing path to be blown by the secondary air, so that the fine powder is blown to the grading chamber, and the thick part is discharged by the rotary valve.

Product Prices:Quoted price and Inquiry

(一)簡介或特點：

1.研磨機械的一種，是物料被破碎之後，再進行粉碎的關鍵設備，同時具有混合作用。

2.機身呈圓筒狀，內裝球形研磨體和物料；機身旋轉時所產生的離心力和摩擦力，將物料和研磨體同時帶到一定高度後落下，經過不斷地相互撞擊和摩擦將物料磨成細粉。

3.可分為乾式和濕式兩種方式；濕式操作常配置震篩機，乾式操作配置抽風和分級、集塵機等設備。

(二)應用或適用範圍：

廣泛應用於水泥、矽酸鹽製品、新型建築材料、耐火材料、化肥、黑與有色金屬選礦以及玻璃陶瓷等行業。球磨機適用於粉磨各種礦石及其它物料，被廣泛用於選礦、水泥、建材及化工等行業。根據物料及排礦方式，可選擇乾式球磨機或濕式球磨機。

(I)Introduction to the Product Features:

1.The ball grinder is a type of grinding machine, and it is the critical equipment to grind the broken materials into powder. Meanwhile, it can also mix the powdery materials.

2.The body of the machine is cylindrical, with a built-ingrinding ball to grind down the materials. The centrifugal force and friction generated when the body of the machine rotates can bring the materials and the grinding ball to a certain height at the same time before they fall down. After continuous mutual impact and friction, the materials can finally be ground into fine powder.

3.The ball grinder can be divided into the dry ball grinder and the wet ball grinder. The wet ball grinder is often configured with a vibrating sieve machine, while the dry ball grinder is often configured with the ventilation and grading equipment and the dust collector.

(II)Scope of Application:

The ball grinder is widely used in cement, silicate products, new building materials, refractories, fertilizers, black and non-ferrous metal beneficiation and glass ceramics industries. The ball grinder is suitable for grinding all kinds of ores and other materials, and it is widely used in mineral processing, cement, building materials and chemical industries. According to the properties of the materials and drainage methods, you may choose the dry ball grinder or the wet ball grinder.

Product Prices:Quoted price and Inquiry

(一)集塵機體基本結構與作業原理：

為濾袋過濾含塵廢氣之粉塵捕捉結構，此結構包含慣性力與攔截作用、擴散作用、重力沉降及靜電吸引等作用。

集塵機可依濾袋清洗方式分為吊袋式、旋風收集式及脈動式三種。其中，脈動式袋濾集塵機則藉由高壓空氣逆洗濾袋，清洗效果最佳，亦能連續運轉，常使用於處理中至大風量。

(二)特點：

1.適用於大量或需連續使用之高濃度粉塵、高品質集塵場所，本機有自動控制間隔時間及自動清洗(高壓空氣)時間，粉塵震落時不須停機，性能穩定，集塵效率高。

2.瞬間噴洗震落，所以壓力損失固定且風量變動少，效率高。

3.採用高密度濾布，在檢視、更換都可由外部方便快速處理。

4.高密度濾布採上部抽取式設計、拆裝、更換極為簡便，管理上亦較節省人力，採用定時循環控制，集塵性能穩定。

(三)應用或適用範圍：

1.機械工廠、造紙廠、製藥廠、窯業工廠、車床刨床、紡織工廠、研磨磨光、纖維工廠、粉末收集、木器製鞋、鑄造工廠、食品廠等行業。

(I)the Basic Structure and Working Principles of the Dust Collector:

The Dust Collector has a dust capturing structure or a filter bag for filtering dusty exhaust gas. This structure includes functions of inertial force, interception, diffusion, gravity sedimentation and electrostatic attraction.

The dust collector can be divided into the wall hanging, the cyclone and the pulse-jet ones based on the methods of cleaning the filter bag. Among them, the pulse-jet dust collector cleans out the filter bag with the countercurrent flow of high pressure, so it has the best cleaning effect. Besides, it also allows continuous operation, so it is often used to process medium to large air volume.

(II)Product Features:

1.The high-quality dust collector is suitable for use in places that require continuous collection of the dust in high concentrations. The machine has functions for automatically control of the cleaning (high pressure air) time and intervals. And you don’t need to shut down the machine when you are shaking off the collected dust. In general, it has stable performance, as the dust collection efficiency is pretty high.

2.The dust can be shaken off instantly with spray washing,so the pressure loss is fixed with less change in the air volume and higher efficiency.

3.The high-density filter cloth is used for convenient inspection and replacement from the outside.

4.The high-density filter cloth can be extracted from the upper side, so it is quite simple and convenient for disassembly and replacement. As for management, it requires less labor with the time cycle controller that allows stable performance in dust collection.

(III)Scope of Application:

Machinery factory, paper mill, pharmaceutical factory, kiln factory, lathe planer, textile factory, grinding and polishing, fiber factory, powder collection, wooden shoes, foundry, food factory and other industries.

Product Prices:Quoted price and Inquiry