 
|
| Product Information |
 |
|
HAR- 0502
|
【Introduction to the exhibit】: Tool for Moxibustion and Heat Application
In traditional Chinese medicine, “acupuncture, moxibustion, medication, cupping, and tui na” are collectively referred to as the five major treatments. Moxibustion, in particular, is a therapy in which heat is applied to energize the meridian and vascular systems of the human body, with a view to relieving pain or inducing bodily resistance to sickness. Moxibustion is very effective in alleviating soreness, itching, numbness, aches, rigidity of blood vessels, and common itches related to bacterial infection. As a non-invasive treatment, moxibustion advantageously features easy application, zero side effects, and a portable tool.
Generally speaking, moxibustion generates heat in one of two ways: by burning dried mugwort or by an electric heating means. Burning dried mugwort is difficult to the general public because a special moxibustion box is required. Electric heating, on the other hand, not only tends to raise the temperature too fast, but also fails to release heat in a slow and concentrated manner, thereby increasing the likelihood of burns. The tool for moxibustion and heat application disclosed in this application is a device configured mainly to conduct heat in a concentrated manner while featuring structural simplicity and ease of use. Referring to the drawing above, the tool 2 for moxibustion and heat application is composed of a base 21 and a contact member 22 on the outside. Inside the tool are a control circuit 23, a coil 24, and a conduction member 25. The control circuit 23 is configured to output a driving signal to the coil 24. The conduction member 25 has one end inserted through the coil 24 and the other end lying against the inner wall of the contact member 22.
The tool 2 can be driven by an alternating current as well as a direct current. When the driving signal generated by the control circuit 23 is a direct current, the coil 24 generates heat as the current flows through the coil, and the heat is transferred to the contact member 22 via the conduction member 25. When the driving signal generated by the control circuit 23 is an alternating current, the coil 24 generates an alternating magnetic field that induces a current in the conduction member 25. The conduction member 25, in turn, generates heat because of the induced current and transfers the heat to the contact member 22.
As the heat generated by the coil 24 is first concentrated in the conduction member 25, which is made of metal, and then (hence indirectly) transferred to the contact member 22, which is made of an insulating material (e.g., wood, as in the product to be exhibited), it is ensured that the heat accumulated inside the contact member 22 will be transmitted outward in a gentle and concentrated way over an extended period of time, allowing a proper moxibustion temperature (i.e., 40~60°C) to be reached shortly, and the heat to penetrate deep into the body.
By first gathering heat with a metallic material and then releasing the heat evenly through an insulating material, the tool for moxibustion and heat application has the advantages of both “burning dried mugwort” and “electric heating” of the conventional moxibustion therapy. Not only is heat conducted in a concentrated manner, but also the tool itself is easy to use. Since the tool for moxibustion and heat application can apply heat to deep blood vessels within a short time, substances which are likely to clog blood vessels can be driven through the blood vessels, thereby promoting blood circulation and mitigating related symptoms. One can apply the tool to any sore or fatigued body part anytime and anywhere to maintain and enhance health.
The pictures above show the tool for moxibustion and heat application actually made into a product. To facilitate use by those who may have problem operating the tool (e.g., elderly users or patients), a handle can be additionally attached to the tool so that a user can easily press the contact member against less accessible boy parts such as the back and the soles. As the handle is threadedly connected to, and therefore readily detachable from, the tool, the tool can be stored and carried around with ease and used wherever and whenever desired in order to relieve fatigue, soreness, or pain. The tool for moxibustion and heat application is structurally simple, compact in size, low in power consumption (it can be driven by a 2W power supply to produce the intended and desirable moxibustion effect), and therefore mass-producible without difficulty. In addition, the wood material of the base and of the contact member not only enhances style and texture, but also effectively prevents the generation of toxic substances which may result from heating a plastic material.
|
|
Manufactured :
FANG XIANG COMPANY
|
|
| Unit Price : |
 Price Inquiry
|
| Min Order : |
1 pcs. |
|
| |
|
|
|
| Recommended Products |
|
|
HAR- 0502
|
|
|
|
 |
|
HAR- 0501
|
|
|
|
|
|
|
|
|
|
中華工商經貿科技發展協會 / www.icet.org.tw
總會會址：臺北市羅斯福路三段149號4樓
>電話：(02)2362-8803 >
>傳真：(02)2362-8810 >
>電郵：contact@icet.org.tw
高雄辦事處：高雄市新興區信守街123號5樓
>電話：(07)236-9728
>傳真：(07)236-0115
>電郵：wwwicetorgtw@gmail.com
駐深圳聯絡處–台灣科技商貿聯合會
>地址：深圳市新高區南區留學生創業大廈2樓206室
>電話：0755-26017760
>電郵：axcocn@163.com
Copyright @ICET. All rights reserved. 版權所有，請勿以任何方式拷貝內容
|
 |
|
