 |
 |
|
| |
YLU FULLY AUTOMATIC HIGH-SPEED UV SPOT VARNISHING MACHINE FOR BOTH THICK AND THIN PAPER |
 |
|
|
| |
FULLY AUTOMATIC LASER-TRANSFERED COLD FOILING SYSTEM WITH SPOT UV VARNISHING MACHINE |
 |
|
|
| |
FULLY AUTOMATIC WATER-BASED P.P FILM LAMINATING MACHINE (FOR BOTH WINDOW-TYPED AND OVERALLFUNCTION BY DISC KNIFE & FLYING SYSTEM) |
 |
|
|
| |
FULLY AUTOMATIC WATER-BASED P.P. FILM LAMINATING MACHINE(DISC KNIFE & FLYING KNIFE SYSTEM) |
 |
|
|
| |
FULLY AUTOMATIC REFLECTION EMBOSSING MACHINE |
|
Products List
|
/ FULLY AUTOMATIC REFLECTION EMBOSSING MACHINE
|
|
Product Information:
CONFIGURATION:
1)FEEDER SYSTEM
2)HEAT CALENDERING SYSTEM
3)EMBOSSING MACHINE
4)STACKER SYSTEM
SPECIFICATION:
Production Speed:10 - 60 PCS/min
Operating Temperature:80ºC - 150ºC
Sheet thickness:80-500 gsm
Power Required:15 HP
Electric Heater:15.07KW
BENEFITS:
-Quick Warm-Up Time, Temperature Control Ranges From 120
-High Position Accuracy Can Be Set To More From Left, Right, Front, And back efficiently.
-Adjustable Embossing Speed, Done At a touch or a Dial.
-Automatic paper Feeding And Stacking Continuously.
APPLICATIONS:
-PACKING: Cosmetic, Gift, Medicine, Cigarette, Wine, Handbag and, Etc.
-CARD: Greeting, Invitation, Birthday, Holiday, Weeding, Special Occasion, Playing, Baseball And, etc.
-OTHERS:
Sticker, Pet, PVC, Catalog, Cover, Clock Cover, Handicraft, Decoration And etc.
-Our design of embossing machine is transcend in the market condition. Most of manufacturer’s heat up the embossing roller with overall system such as oil heating; electric heating but they unable to perform partial heating. For this reason, it’s under the process with different material and embossing lines, it’s can’t control the tension of vary of material and hence not able to perform perfect quality.
Our production of embossing machine adopt partial heating against varies of different material and tension.
Product Prices:Quoted price and Inquiry
|
|
|
/ FULLY AUTOMATIC WATER-BASED P.P. FILM LAMINATING MACHINE(DISC KNIFE & FLYING KNIFE SYSTEM)
|
|
Product Information:
CONFIGURATION:
1)FEEDER SYSTEM & PRE-LOADING SYSEM
2)DUST REMOVAL SYSTEM
3)LAMINATING SYSTEM
4)DRYING SYSTEM
5)DISC-KNIFE & FLYING KNIFE CUTTING SYSTEM
6)STACKER SYSTEM:
SPECIFICATION:
Specification:1200 × 900 mm
Minimum Sheet Size:300 × 300 mm
Laminating Speed:10 - 60 m/min
Laminating Pressure:100 - 150 kg/cm2
Laminating Temperature:50 - 100°C
PP film thickness:12~60 micro (μ)
Sheet thickness:80-600 gsm
Electric Heater:66 KW
Power Required:33 HP
Machine Dimension (L × W × H):9623 × 2415 × 2800 mm
Net Weight (Approx):9600 Kg
Function:
1.Newest type of high efficient feeder adopt vacuum pump to feed the paper and enable to provide paper stability and reduce noise. The stream-type mechanism enables non-stop operation, no wastage of PP film, saves time and manpower.
2.The special mechanism for paper rectification is fits for all kinds of thick and thin paper size feeding, also ensured accurate lamination position. That makes delicate quality. It is easy to operate speed and accurately.
3.This machine adopts the latest paper length settings and the paper positioning design with servo motor.
4.Glue coating system adopts left and right side unilateral adjusting control, which enable
gluing evenly. The motor control is the convenience of gluing and un-gluign production automatically.
5.The new type of dryer equipment designed by heating wind and warming structure. It mechanism enable PP film to reached speed and dried in shorter time. This machine was specially created to ensure optimum space application and to reducing operational cost.
6.Auto paper cutter adopts disc knife as an auxiliary for flying knife enter the cutting position.
When film laminated on the paper that close the cutting edge, disc knife can cut a small gap from overlapping section and flying knife will easy enter the cutting.
7.The MPET material is hardness and not easy to tear it up. After passes through the laminating cutting section, you can using this system to cut it off immediately. The finished products will deliver to stacker automatically.
8.The electronic circuit designed system enable the operating speeds easily controlled, reduce noise and low breakdown rate. It’s a product of delicate innovation.
rding to differ from material and tension. Partial heat up able to control the expansion and embossing quality when embossing roller exposed to heat.
Product Prices:Quoted price and Inquiry
|
|
|
/ FULLY AUTOMATIC WATER-BASED P.P FILM LAMINATING MACHINE (FOR BOTH WINDOW-TYPED AND OVERALLFUNCTION BY DISC KNIFE & FLYING SYSTEM)
|
|
Product Information:
CONFIGURATION:
1.FEEDER SYSTEM
2.DUSTMAL SYSTEM ---------adopt servo motor synchronized with overlapping
3.COATING SYSTEM-----------adopt servo motor synchronized with overlapping
4.INFRARED RAY SYSTEM
5.LAMINATING SYSTEM
6.DRY SYSTEM
7.DISC KNIFE SYSTEM & FLYING KNIFE SYSTEM
8.STACKER SYSTEM
SPECIFICATIONS:
Specification:1200 × 900 mm
Maximum Sheet Size:1200 × 900 mm
Minimum Sheet size :300 400
Speed:10 - 60 m/min(depends sheet quality)
Laminating Pressure:100 - 150 kg/cm2
Laminating Temperature:50 - 100°C
Electric Heater:45 KW
Power Required:34 HP
Machine Dimension (L × W × H):15503 X 2415 X 2800
Net Weight (Approx):11600 Kg
This a machine designed especially for the P.P film laminating of thick paper. It’s can be used for fully laminating and when its system switch to window-type of thick paper, pumping the glue and apply on the surface of the sheet and transported sheet through conveyor to IR curing system for dry process. Heat up the upper roller by water temperature controller and press roller to pressurize each sheet for the laminating performance. Then through the cutting system its unique twin-disc knife to cut a gap then tear it up from the gap and forward to stacker automatically.
1.Latest type of feeder adopt vacuum pump for suction and feeder. The feeder is stable and less noise. With the stream-type structure to be able work with non-stop condition.
It will not water the P.P film as well save the time and manpower.
2.Special design of align structure meets for vary of sheet size and thickness. The sheet can be aligned with vertical position and enable the laminating quality done delicately, easily, accurately.
3.Coating system using unilateral adjusting control, which enable coating evenly and to use motor control coating automatically and separate roller from sheet for the convenience for operation.
4.The setting of overlap and transport adopt without distance limitation. The sheet able to decide the time of feeder and reduce sheet wastage.
5.Curing system adopt newest heat wind design and the structure won’t lose the temperature. Its enable P.P film reach to the rapid drying in the short time.
6.Auto paper cutter adopts disc knife as an auxiliary for flying knife enter the cutting position.
When film laminated on the paper that close the cutting edge, disc knife can cut a small gap
from overlapping section and flying knife will easy enter the cutting.
7.The MPET material is hardness and not easy to tear it up. After passes through the laminating cutting section, you can using this system to cut it off immediately. The finished products will deliver to stacker automatically.
8.The laminated products will delivery to stacker automatically. Convenience the operator to control all the finished products. Besides, the stacker will align the sheet with three sides to ensure the sheet stack with perfect alignment. Once the sheet reach to certain quantity that operator can remove the pallet without stop the machine.
Product Prices:Quoted price and Inquiry
|
|
|
/ FULLY AUTOMATIC LASER-TRANSFERED COLD FOILING SYSTEM WITH SPOT UV VARNISHING MACHINE
|
|
Product Information:
CONFIGURATION:
1.FEEDER SYSTEM
2.SPOT VARNISHING SYSTEM
3.PAPER-DROPPING SYSTEM
4.FRONT CONVEYOR SYSTEM
5.LASER-TRANSFERRED COLD FOILING AND UV CURING SYSTEM
6.BACK CONVRYOR SYSTEM
7.STACKER SYSTEM
SPECIFICATIONS:
Max. Varnishing Size:730 × 1040 mm
Min. Varnishing Size:360 × 400 mm
Max. Speed:6000 Sheet/h
Sheet Weight:90-500 gm2
Ultraviolet Ray Light Tube:42 Kw
Power Required:60 Kw
Machine Dimension (L × W × H):13430×2282×2850 mm
Total weight(Approx):11600 Kg
This unit is mainly used for high-grade anti-counterfeiting prints. Thus, the images of the hologram film can transferred properly on the printed surface. It is comparable to the hologram film lamination and significant cost saving, The final result represents its attractiveness and value added features.
This is the development for hologram images transferring production line in Taiwan.
We are the one and only who manufacturer this type of machine.
There are few configurations would like to share with you as below:
1.The ultraviolet dyer used for this machine is a special feature regarding the energy saving. Consequently, the film can be can be multiple applications without damaging the film.
2.There is no plastic film laminated on the substrate; it can be easily recycle and is biodegradable.
3.Advanced technology and workmanship for counterfeit prevention.
4.When the hologram images are transferred to the printed substrate; it attractive metallic brilliancy indeed enhance of the beauty of the printings. The finished products certainly not able to be copied by others.
5.Widely-ranged of products application. Multi-function such as fully image transferred and spot image transferred, fully sheet UV varnishing and spot UV varnishing, fully sheet water based varnishing and spot water based varnishing etc..
This is a multi-function machine to save your working space and cost. Easy operation and quick learning, although you are not doing the hologram film transferring job that you can still doing the UV varnishing process. It is a machine change the job easily as a transformer.
Product Prices:Quoted price and Inquiry
|
|
|
/ YLU FULLY AUTOMATIC HIGH-SPEED UV SPOT VARNISHING MACHINE FOR BOTH THICK AND THIN PAPER
|
|
Product Information:
CONFIGURATION:
1)FEEDER SYSTEM
2)UV VARNISHING SYSTEM
3)UV CURING SYSTEM
4) STACKER SYSTEM
SPECIFICATIONS:
Maximum Sheet Size:730 × 1040 mm
Minimum Sheet Size:300 × 300 mm
Sheet Weight:80 - 500 g/m2
Maximum Speed:6000 S.P.H.
Auto Paper Feeder:3 KW
Auto Paper Stacker:1.5 HP (1.2 KW)
Ultraviolet Ray Light Tube:42 KW
Power Required:3.5 KW
Machine Dimension (L × W × H):8100 × 2290 × 1700 mm
Net Weight (Approx):7400 Kg
FUNCTIONS:
1)Newest model of high efficiency feeder enabled the vacuum pump to provide paper sucking, reduce noise and stability. Suitable to works with spot varnishing product.
2)The conveyor system adopted 9 pieces type of gripper for paper sheet feeding. The transmission chain system operated on high-speed printer structure with stable and safe rail conveyance. Both thick and thin paper can be used, also perform spot varnishing according to the product needs.
3)The steam-line feeding system allows carry gripper to receive and collect paper. The stacker system adopted wind pressure circuit. The main feature of the mechanism reduced noise, low malfunction, easy to change paper size and at random selects paper during operation.
4)The UV lamp case has three lamps per set. The system is electronic circuit designed. When paper feeding occur the lamp will automatically turn on. Thus when paper feeding is stopped, the lamps are switched back to semi-on position. This is to prolong the lamp life and to save power consumption. There is a stainless steel conveying grip below the lamp case, which rotated to match the operating speed. Once the paper falls down the conveying grip will automatically adjust back to prevent paper being shined by the lamp that may cause fire.
5)The UV oil pressure control roll is reversed rotated. It’s has the following characteristics:
(1)Newest rubber roll model adapts the hydraulic pressure control, so that the rubber wheel will not be damage, and a hydraulic oil flow control gauge is attached.
(2)By controlling the thickness of UV oil layer, the rubber roll can be oil less.
(3)The reverse designed rotation helps the dust on paper surface to be removed naturally, and to recover the oil back to the tank.
6)The special cooling system maintained the paper quality, and will not damage after the varnishing and laminating process.
7)The pressure roll adopts high-speed printer type adjustments. Single side adjustment, no needs to adjust back and forth, due to oil thickness at the right and left sides, oil pressure gauge is attached.
8)The older model of receiving roll usually cause oil specks on the varnishing paper and instead the air flowed system is been used. After the varnishing the paper will not have specks and the quality improved.
9)The speedy type-faced is changed from up and down, which saves time and less trouble compared with the older model. The type-faced can be adjusted from the four sides and enable precise spot coating matching with resin plate.
10)This machine can employ water based environment-friendly smoothing (shining) process, and has an INFRA RED RAY device (optional).
Product Prices:Quoted price and Inquiry
|
|
|
 |
|
尚未建立資料 / NO DATA!
|
 |
